SEMSAN PV-DW Plunger Type Flow Control Valve DN 150/600 PN25

SEMSAN PV-DW

Application

  • Open – Close valve for high presure and flow velocity
  • Water Level Control Valve
  • Bottom Outlet Valve
  • Turbine Inlet and Turbine By – Pass Valve
  • Pressure Control Valve for Drinking Water
  • Flow Rate Regulation Valve
  • Pressure Control for Irrigation Projects

Control

  • Handwheell
  • Electrical Actuator
  • Pneumatic Actuator
  • Hydraulic Actuator
  • On-off or Modulating Operation

ADVANTAGES

  • Pressure, flow rate and water level control valve
  • Low operation torques on high pressure diferences
  • High safety coefficient design
  • Lineer regulation capability
  • Suitable for modulating operation
  • Low cavitation risk
  • Metal seaing, additional EPDM seal ring
  • Special outlet design for project.
  • Operation types for application areas
  • Low maintenance cost

DESIGN

  • Flanges EN 1092-2
  • PN10 – PN64
  • Double Flange
  • Face to Face EN 558 – 1 Series 15 (up to DN500 1,5 x DN)
  • Metal seaing, additional wras certificated EPDM seal ring
  • Test standart EN 12266-1
  • Coating wras certicated electro powder epoxy coating ral 5017(min 250 mic.)
  • Max Operation Temperature 85 °C

CORROSION PROTECTION

  • Electrostatic Powder Coating (Coating Brands Certificated By WRAS)

Part List

  PART NAME MATERIAL LIST
1 BODY GJS400-15
2 PISTON CONNECTION PART GJS400-15
3 BACK COVER GJS400-15
4 CRANK SHAFT 1 AISI420
5 CRANK SHAFT 2 GJS400-15
6 VALVE SHAFT AISI420
7 RETAINING RING AISI 304L
8 SEALING RING EPDM
9 CRANK BEARINGS GCuSn10
10 CONNECTION PINS AISI 420
11 PINS BEARING CAP AISI 420
12 SHAFT BEARINGS GCuSn10
13 INLET BOLTS A2
14 BACK LID BOLTS A2
15 PIN BOLTS A2
16 PISTON SEALING RINGS EPDM
17 SHAFT BEARINGS GCuSn10
18 SHAFT SEALING RINGS EPDM
19 CONTROL BOX SEMSAN NDK SERIES
20 PISTON AISI 304L
21 PISTON SLIDING SURFACE GCuSn10
22 COATING All Cast Parts WRAS Approved Powder Epoxy

Valve Dimensions

Valve Dimensions

Pictures